Dear Reena: Can you recommend an eyeglass cleaner and type of cloth to use? Thanks,
Here is a wonderful eyeglass cleaner recommended to me by an optician: Fill a spray bottle three-quarters full of rubbing alcohol and one-quarter with water. Add a few drops of dish soap. Shake to mix. Spray lenses and gently wipe with a soft cloth (not paper towels, toilet paper or tissues; these will scratch your lenses).
Dear Reena: I’ve been reading your column for a while now and often find the advice to be great. One thing I’ve been struggling to get rid of is scratches on my front window. I had a decal pasted on, and when I took it off, it left a gummy substance that I tried to remove, and ended up scraping the glass. Now it’s scratched and I don’t know how to get it off. Can you help?
If you run your fingernail over the scratch and your nail catches on the scratch, it is probably too deep to repair. However, if you are only dealing with a surface scratch, the most popular solution is to purchase cerium oxide from your local home hardware retailer. You will need: a bowl, a three-inch felt polishing wheel that will attach to your drill, water, soft clothes and cerium oxide. In the bowl, make a paste with 1 Tbsp. of cerium oxide and enough water to create the consistency of heavy cream. Attach the felt polishing wheel to your drill. Dip the felt into the cerium oxide solution. Gently buff the scratch, using a circular motion. You will notice a dried film begin to form, be cautious at this point as you do not want the glass to crack. Wipe the area. If the scratches remain, repeat the process.
Re: Scratches on a Porcelain Sink
Hello Reena: We had a porcelain bathroom sink installed many years ago by a professional. However, during the process, some small scratches formed in the sink. We fixed the porcelain by gently rubbing the area with a damp, pumice stone. It sounds counter intuitive to rub a scratch with something “scratchy,” but we were pleased with the results, as they disappeared. And the pumice stones only cost a few dollars.
Re: Thawing Fresh Buns
I have made my own fresh buns for many years, and always freeze them. To thaw them out I always lay them on a piece of kitchen towel and defrost them for a few seconds in the microwave.
• Instead of disassembling my shaver for cleaning, I place the head of my shaver in a small bowl of ammonia and turn it on. The shaver cleans as it spins. This procedure also prevents heat buildup.
Note: Every user assumes all risks of injury or damage resulting from the implementation of any suggestions in this column. Test all products on an inconspicuous area first.
Ask a question or share a tip at reena.ca